Shifter Install

Here is a picture, re-enacted on the work bench, of the Ford shifter and one rear bolt.

• Use a pair of Channel-Locks as a lever by leaving the two rear bolts loose but in place so the bolt heads can be used as a fulcrum. 
• Invert the channel-locks and hook the serrated edge under the flange on the stock shifter and rest the plier against the bolt.
• Pop the old shifter loose. 
• Remove the two rear bolts.
• Remove stock shifter.

 You won't have to get under the car when installing an aftermarket shifter if you use this method.

Back
 

Home